SMC Networks EZ Networking SMC2621W-P User Manual page 39

Chapter 4 Client PC Configuration
3. On the [Details] tab, shown above, click the [Capture Printer
Port] button to view the [Capture Printer Port] dialog box, as
shown below.
4. On this dialog box:
•
•
•
34
Figure 15. Capture Dialog – Windows 98/ME
Select the [Device] port on the PC to be captured.
Normally, this will be LPT1 (parallel Port 1).
Enter or select the [Path] to the printer. This will be the
same as the path shown as [Print to the following port]
on the [Printer Properties] window.
Check the [Reconnect at logon] checkbox. If this is not
done, the capture setting will be lost when Windows is
restarted.