Safety Instructions - SMC Networks EZ Networking SMC2621W-P User Manual

Safety Instructions

For your own safety, and to protect your Wireless Print Server,
please observe the following safety advice.
1. Unplug this device from its power source before cleaning.
Use only a slightly dampened cloth for cleaning. Do not use
liquid or aerosol cleaners.
2. Avoid using this product near water. Exposure to water poses
an electric-shock hazard.
3. Do not place the Wireless Print Server on an unstable
surface. The device may fall causing serious damage
to the device.
4. This device should only be used with the power supply type
specified on the marking label. If you are not sure of the type
of your local power supply, consult your dealer or the local
power company.
5. Do not pinch, crimp or otherwise damage the power cord.
If exposed to foot traffic, ensures that the cable is properly
shielded and does not pose a tripping hazard.
6. If using an extension cord, make sure the total ampere rating
of the products using the cord does not exceed the extension
cord's ampere rating.
7. Do not attempt to service this device, as opening or removing
casing may expose you to dangerous voltage points or other
risks. Refer all servicing to qualified service personnel.
Safety Instructions
3