Windows 9X/Me Setup - SMC Networks EZ Networking SMC2621W-P User Manual

Chapter 4 Client PC Configuration

Windows 9x/ME Setup

Before performing the following procedure, the Wireless Print
Server must be installed on your LAN, and configured as
described in Chapter 3. Both the Wireless Print Server and
the attached printer should be powered ON.
1. Insert the supplied CD-ROM into your drive. If the setup
program does not start, run SETUP.exe in the root folder.
2. Click the [Installation] button, then select the [User Install].
3. Follow the prompts to complete the installation of the
Peer-to-peer Printer Port Driver. (Refer to the Windows
section of Chapter 8 - Troubleshooting if there is a problem
with the installation.)
4. The Print Driver Setup will then run.
In future, you can use [Start – Programs – PrintServer Driver –
Printer Port Setup] to run the program again.
24
Figure 8. Installation Screen