SMC Networks EZ Networking SMC2621W-P User Manual page 24

•
If using other methods, you must check manually, as follows:
1. Select the [Settings – Control Panel – Network] option on the
[Start] Menu. You should see a screen like the one following:
•
The top line in the list [NetBEUI -> PCI Fast Ethernet Adapter]
indicates that the NetBEUI protocol is installed on this PC.
Your PC will show the name of your Network card rather
than "PCI Fast Ethernet Adapter".
•
The highlighted line [TCP/IP -> PCI Fast Ethernet Adapter]
indicates that TCP/IP is installed. Your PC will show the name
of your Network card rather than PCI Fast Ethernet Adapter.
2. If neither line is present:
•
Install the NetBEUI protocol by selecting [Add – Protocol –
Microsoft – NetBEUI – OK]. You may be prompted for your
Windows CD-ROM.
Figure 2. Network Configuration
Overview
19