Overview
Your Wireless Print Server supports the following Unix printing
methods:
•
Direct Socket Interface
•
LPD
In either case, you must configure both the Wireless Print Server
itself and your Unix system, as described in the following sections.
Wireless Print Server IP Address Configuration
Because it supports dynamic IP Address allocation using DHCP
or BOOTP, the Wireless Print Server ships with an IP Address of
0.0.0.0. This is NOT a valid IP Address.
Therefore, you must do ONE of the following:
•
Check your DHCP server (if you have one), and determine
the IP Address allocated to the Wireless Print Server.
•
Configure your BOOTP Server (if you have one), to provide
an IP address to the Wireless Print Server, then restart the
Wireless Print Server.
•
Use a Windows platform and run the Setup Wizard or BiAdmin
utility to allocate a valid IP Address to the Wireless Print Server.
A
PPENDIX
U
NIX
S
YSTEMS
C
115