Configure Server - SMC Networks EZ Networking SMC2621W-P User Manual

Chapter 6 Web-Based Management

Configure Server

Print Server
Name
Device
Password
Enable
(AppleTalk,
NetBEUI)
70
Figure 31. Configure Server Screen
Change the default name if you wish. The new
name must not contain any spaces or blanks.
Enter the device password, and again in the
Verify field. Once a password is entered, it is
required in order to gain access and change
the configuration.
Non-TCP/IP Protocols may be disabled if they
are not required on your LAN. The available
protocols depend on the Print Server model.