Trim / Dial Select - FUTABA 7XC Instruction Manual

This function allows selection of the function performed by the digital dial DL1 and digital
trimmers (DT1 to DT6), step amount adjustment, and operating direction reversal.
- The table in page 66 lists the functions that can be assigned to each dial and digital trim.
The assigned function is also displayed on the opening screen together with the current
adjustment value. They are displayed in DL1 and DT1 to DT6 order, from top to bottom.
- The step amount can be adjusted. The table in the following page shows the relationship
between set value and step amount.
- The operation direction can be reversed. (Nor/Rev)
Home screen
Function select dial setup
1
Tap the trim or dial you want to set.
(DT1, 2, 3, 4, 5, 6 / DL1)
The function list appears on the Trim/Dial select menu
screen.
2
(Function setup)
Tap and select the function you want to use. To cancel, tap
[Close].
64

Trim / Dial Select

Menu screen
Menu-1
Trim / Dial Select
Linkage menu
Menu-2
Since there are multiple pages,
tap the
page. When you are done, tap
[Close] to fi nish.
Trim / Dial select
Function list
See page 66
mark and move the