4Ws Mixing - FUTABA 7XC Instruction Manual

This function can be used with crawlers and other 4WS type vehicles. It is mixing that uses
the 1st channel to control front side steering and the auxiliary channel to control rear side
steering.
A method of specifying directly for each type of opposite phase (only on the in-phase side),
reverse phase, in-phase side and rear side by selecting SW1, SW2, SW4, SW5 and SW6 in
the " Switch select " function (page 67). And, it is possible to switch in order.
Home screen
The mixing function is assigned to auxiliary channels used by other mixing cannot be
used. When the number of channels is insuf昀椀 cient, cancel the other mixing.
4WS mixing adjustment
(Preparation)
- Since this function is used by switching the type of 4WS with a switch, the switch used by the
"Switch select" function (page 67) is set.
1
(Function ON/OFF)
Tap "Mixing" (ON) or (OFF) to select ON /
OFF.
"OFF" :Mixing function OFF
"ON" :Mixing function ON

4WS Mixing

Menu screen
Menu-1
When the mode is activated by a switch, indicated
on the home screen for a few seconds.
Display the current 4WS type.
4WS Mixing
Mixing menu
Menu-2
Setting
- Tap (ON) / (OFF).
4WS mixing
111