FUTABA 7XC Instruction Manual page 144

Brake max. duty
All type :0%~100%
Same as Link software Brake Max. Duty.
This setting can set the braking force between the neutral
point and Max brake point.
The larger this value, the greater the braking force. When
set to "0%", the brakes are not effective.
Reverse max. duty
MC401,402CR/MC950CR/MC940,960CR :0%~100%
Same as Link software Reverse Max. Duty.
This setting can set the reverse power between the
neutral point and Max reverse point.
The larger this value, the greater the reverse power.
When set to "0%", reverse is not active.
Neutral brake
All type :0%~100%
Same as Link software Current Limit timer.
Make this setting when you want to use the brakes at the neutral throttle (OFF) position by
throttle operation. The larger this value, the greater
the braking force. When you want to use the neutral
brake, set this value to "0%".
Reverse mode shift level
MC401,402CR/MC950CR/MC940,960CR :0%~100%
Same as Link software Reverse Mode Shift Level.
The reverse operation can be done with the throttle
throttle stick to be thrown from brake status to the
neutral. The value can set the amount of the brake
in order to switch to the reverse operation.
Forward BOOST
MC401,402CR/MC601,602C/MC851C :0%~100%
Same as Link software Forward Boost (Boost).
Operation near the throttle stick neutral position be-
comes a sharp rise.
100
50
0
144
Forward BOOST
"50"
"0"
Forward operation
MC401,402CR
MC950CR
MC940,960CR
MC401,402CR
MC401,402CR
MC (ESC) Link
%
100
50
0
Brake (Reverse)
operation
MC601,602C
MC850,851C
MC950CR
MC940,960CR
MC601,602
851C