Timer - FUTABA 7XC Instruction Manual

Allows you to select between one of four timers. Up timer, fuel down timer, lap timer and
lap navigate timer.
- The Up timer can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is oper-
ated and accumulates the time between each start and stop. (When
the count reaches 99 minutes 59 seconds, it returns to 00 minutes 00
seconds and repeats the count.)
- The 昀椀rst start operation can be linked to the throttle stick.
- An alarm sound can be set. The passage of time is announced by
sounding of a buzzer (beeps) each minute after starting.
- Alarm :Generates a beep at the set time (minutes).
- Pre-alarm :Alarm advance announcement sound. Sounding begins 10 seconds before the set alarm time.
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.
- The fuel down timer is used primarily to check the refueling time of gasoline engine
cars. (The remaining time is displayed.)
- Each time the switch is pressed, the timer is restarted and
the set time is cou nted dow n. The star t time becomes the
alarm set time. (When counted down to 00 minutes 00 sec-
onds, the timer becomes an up timer.)
- The fuel down timer can be initially started by throttle stick.
- An audible alarm can be set. In addition, the passing of time is indi-
cated by sounding of a buzzer each minute after starting.
- Alarm :Buzzer sounds at the set time (minute)
- Pre-alarm :Alarm advance notice sound. Beeping begins the set time (seconds) before the alarm.
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.

Timer

Up timer function
Fuel down timer function
Timer
125