Telemetry :Temperature - FUTABA 7XC Instruction Manual

This screen displays and sets the temperature information from an SBS-01T (telemetry
temperature sensor) sold separately. The temperature of the engine, motor, amp, etc. of the
chassis while running can be viewed at the transmitter. When the temperature becomes
higher or lower than the set value, it can be announced by an alarm and vibration.
* A temperature sensor must be installed in the model car. Install and connect the sensor in accordance
with the sensor instruction manual.
Telemetry
Alarm and Vibrator function setup
1
(Limit adjustment)
Tap the "
the screen.
Use the [+] or [-] button to adjust the limit voltage.
2
(Alarm and vibrator function setup)
Tap the "
[Voice].
"Inhibit":No audible alarm/ "Buzzer":Audible alarm/ "Voice":Voice alarm
Tap the "
[Type 2], or [Type 3].
"Inhibit" :No active vibration
"Type 1" :Continuous vibration
"Type 2" :Intermittent vibration for a long time
"Type 3" :Intermittent vibration for a short time
3
(Speech function setup)
Tap the "Voice" (ON) or (OFF) to select ON / OFF.
"OFF" :No voice guide
"ON" :Information loaded by voice
4
When fi nished, return to the Telemetry screen by pressing the HOME button.
156
Telemetry: Temperature
Limit temperature setting
(Temperature that sounds
an alarm)
" [ Limit] or " " [ Limit]. Value input buttons appear on
" / " " [Alarm] type and select [Inhibit], [Buzzer]or
" [Vibrator] type and select [Inhibit], [Type 1],
" / "
Telemetry
Current temperature
The minimum and maximum the
when powering ON are shown.
Alarm and vibrator ON/OFF and
type setting (The arrow indicates
that an alarm is generated when the
speed drops below the set value and
the arrow indicates that an alarm is
generated when the speed exceeds
the set value.)
The Speech function (ON/OFF)
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Setting
- Tap alarm type.
Inhibit/ Buzzer/ Voice
Setting
- Tap Vibrator type.
Inhibit/ Type 1/ Type 2/ Type 3
Setting
- Tap (ON) / (OFF).
*The voice guide loading inter-
val is set by sensor menu.