Display When Power Switch Turned On; Edit Button Lock And Trim/Dial Lock - FUTABA 3PKS Instruction Manual

Display when power switch turned on

Model name (10 characters)
* D i s p l a y m o d e c a n b e
changed by using the SYS-
TEM function. (See pge 98)
User name display
When the (END) button is held down for 1 second or longer at the initial screen, the
Futaba logo and user name are displayed for about 2 seconds.

Edit button lock and trim/dial lock

T3PKS setup and operation by edit button (p.15) and digital trim DT1, DT2, and DT3
and dials DL1, DL2, and DL3 can be prohibited.
Setting
1
Edit button lock; When the (+) button is pressed for about 1 second at the initial screen,
a confirmation beep is generated and the edit button lock display
screen.
Trim/dial lock; When the (-) button is pressed for about 1 second at the initial screen,
a confirmation beep is generated and the trim/dial lock display
screen.
Clearing
1
Edit button lock and trim/dial lock can be cleared in the initial screen state by the same
method as setting described above. (The edit button lock display
display
22
Power switch turned on
Total timer display (H:M)
Steering trim display
Throttle trim display
Displays whether or not a memory
module is inserted. When a memory
module is inserted, "DPAC" is dis-
played.
When radio waves are being
emitted, "RF" is displayed. When
radio waves are not being emitted
when turned on by display switch
and when the DSC function is
used, "DISP" is displayed.
disappears from the screen.)
Beep confirmation sound is generated and the
initial screen shown below appears.
Battery voltage display
Edit button lock display
Trim/dial lock display
DL1
*Function names and rate
DL2 assigned to dials are dis-
played.
DL3
DT1
DT2
DT3
"BLHT" is displayed when back-
lighting is ON.
Displays whether or not a
memory module is inserted.
When a memory module is
inserted, "DPAC" is displayed.
appears on the
appears on the
or trim/dial lock