Installation; Receiver And Servo Connections - FUTABA 7XC Instruction Manual

Connect the receiver and servos as shown below. Connect and install the receiver and ser-
vos in accordance with " Installation Safety Precautions " on the next page.
The 昀椀gure shown below is an example. The method of connecting the motor controller to
the motor and battery depends on the motor controller used. Purchase the motor controller
and servos separately. The receiver also depends on the set.
Installation When An Electronic Speed Control Is Used
Receiver
To Battery
Note: The R334 SBS - E receiver is for electric cars. Please do not use for the engine car.
30

Installation

Receiver And Servo Connections

ESC
Switch
CH2
Receiver
CH1
Steering Servo
Installation For Gas Powered Models
CH3
CH4
CH1
CH2
S.BUS2
Switch
Motor
Battery
CH4 Servo
CH3 Servo
Throttle Servo
Steering Servo