System Configuration - Interlogix GE-DS Series User Manual

GE-DS-82 and NS2503-8P/2C Series User Manual
When a client logs off, it sends an EAPOL-logoff message, causing the switch port to transition to the unauthorized state.
If the link state of a port transitions from up to down, or if an EAPOL-logoff frame is received, the port returns to the
unauthorized state.

System Configuration

802.1x makes use of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a means of
authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of
preventing access to that port in cases in which the authentication and authorization process fails.
To enable 802.1x, from System \ System Information \ Misc Config then you still to fill in the authentication server
information：
Figure 4-12-3: System information \ Misc Configuration\ 802.1x Protocol
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
Figure 4-12-4: 802.1x System Configuration interface
123