Power Over Ethernet (Ge-Ds-82-Poe / Ns2503-8P/2C); Power Over Ethernet Powered Device - Interlogix GE-DS Series User Manual

Table of Contents

Advertisement

Power over Ethernet (GE-DS-82-POE / NS2503-8P/2C)

Providing up to 8 PoE, in-line power interface, the GE-DS-82-POE / NS2503-8P/2C PoE Switch can easily build a power
central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 8 camera / AP can be easily
installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office.
Without the power-socket limitation, the PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.

Power over Ethernet Powered Device

3~5 watts
6~12 watts
10~12 watts
3~12 watts
GE-DS-82 and NS2503-8P/2C Series User Manual
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed
for un-interrupt power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse
can install the Access Point any where with no hesitation
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC
sockets.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
127

Advertisement

Table of Contents
loading

Table of Contents