System Commands - Interlogix GE-DS Series User Manual

System Commands

show running-config
Description:
Display the running configuration of the switch.
copy running-config startup-config
Description:
Backup the switch configurations.
erase startup-config
Description:
Reset to default factory settings at next boot time.
clear arp
Description:
<ip-addr> specifies the IP address to be cleared. If no IP address is entered, the entire ARP cache is cleared.
show arp
Description:
Show the IP ARP translation table.
ping
Description:
Send ICMP ECHO_REQUEST to network hosts.
Parameters:
<1..999> specifies the number of repetitions. If not entered, it will continue to ping until you press <Ctrl>-C to stop.
GE-DS-82 and NS2503-8P/2C Series User Manual
146