Table of Contents
Advertisement
Power over Ethernet Commands
show poe
show poe status
poe temperature-protection
poe limit-mode
poe enable
poe priority
poe maximum-power
GE-DS-82-POE power budget is 110W and support 8 ports PoE. This chapter will be
described how to configure PoE feature by example of GE-DS-82-POE.
Display System PoE status
show poe
Description:
Show System Power over Ethernet information
Command Level
Global Configuration
Example:
Switch (config)# show poe
Maximum Available Power
System Operation Status
POE Admin mode
Temperature Unit1
Temperature Unit2
Over Temperature
PoE Power Consumption
Temperature Threshold
Usage
Usage Threshold
PoE Power limit mode
show poe status
Description:
Show per PoE port information
Command Level
Global Configuration
Syntax:
show poe status [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example 1:
GE-DS-82 and NS2503-8P/2C Series User Manual
(GE-DS-82-POE / NS2503-8P/2C)
Show System Power over Ethernet information
Show PoE port information
Enabling or disabling the PoE power supply over temperature protection
Configure System PoE power limit mode information
Enabling or disabling the port POE injects function
Set port priority for the power supply management
Enabling or disabling per port power output limit
:150Watts
: on
: Enable
: 38C/100F
:35C/95F
: 55 watts
: 30%
: 60
: 0%
: 100%
: Consumption
175
Advertisement
Table of Contents
