Configure Poe -- Port - Interlogix GE-DS Series User Manual

poe set { profile / <1-7> / <on / off>/ port list}
Parameters:
<profile> Set profile
<1-7> 1~7, Week day From Monday(1) to Sunday(7)
<on/off
> Enable or Disable POE port at the hour.
<port list> Hour list, e.g. 3,6-8
Example:
(config)# Switch(config)# poe set profile1 1 on 3
Switch

Configure PoE -- Port

poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable [<port-list>]
[no] poe enable [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
(config)# poe enable 1
Switch
Switch(config)# show poe status 1
Port Admin Oper
Port1 Enable on
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port Admin Oper
Port1 on
Disable
Power
Priority Power Limit[W]
Mode
802.3at Low 15.4
Power
Priority Power Limit[W]
Mode
802.3at High 15.4
GE-DS-82 and NS2503-8P/2C Series User Manual
Current Consumption
Current[mA]
[W]
13.4
Current Consumption
Current[mA]
[W]
13.4
180
Device Class
279 0
Device Class
279 0