Installing The Sfp Transceiver - Interlogix GE-DS Series User Manual

Installing the SFP Transceiver

The sections describe how to plug-in an SFP transceiver into an SFP slot.
The SFP transceivers are hot-swappable. You can plug-in and out the transceiver to/from any SFP port without a need to shut
down the Managed Switch. As the
Approved IFS SFP Transceivers
IFS Managed switches supports both single mode and multi mode SFP transceivers. Please refer to below chart, as well as IFS
website for latest compatible SFP modules.
1000Base-SX/LX SFP transceiver:
We recommend using IFS SFPs with the Switch. If you insert a SFP transceiver that is not
supported, the Managed Switch will not recognize it.
Figure 2-12 appears.
Figure 2-12: Plug-in the SFP transceiver
GE-DS-82 and NS2503-8P/2C Series User Manual
21