Per Port Priority; Mac Address Configuration - Interlogix GE-DS Series User Manual

<level-list> specifies the priority levels to be high or low.
Level must be
between 1 and 7.
e.g. qos level highest 7
e.g. qos level lowest 4
show qos
Description:
Show QoS configurations, including802.1p priority, priority level.
e.g.
Switch(config)# show qos
QoS configurations:
QoS mode: weighted round robin
Highest weight: 8
Second High weight: 4
Second Low weight: 2
Lowest weight: 1
802.1p priority[0-7]:
Lowest Lowest

Per Port Priority

port priority
Description:
Set port priority.
Syntax:
port priority <disable | [0-7]> [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
e.g. port priority disable 1-5

MAC Address Configuration

clear mac-address-table
Description:
Clear all dynamic MAC address table entries.
mac-address-table static
Description:
Set static unicast or multicast MAC address. If multicast MAC address (address beginning with 01:00:5E) is supplied, the last
parameter must be port-list. Otherwise, it must be port-id.
Syntax:
mac-address-table static <mac-addr> <vlan-id> <port-id | port-list>
no mac-address-table static mac-addr
Description:
Delete static unicast or multicast MAC address table entries.
Syntax:
no mac-address-table static mac-addr <vlan-id>
SecLow SecLow SecHigh
GE-DS-82 and NS2503-8P/2C Series User Manual
SecHigh Highest Highest
161