Smtp Setting - Interlogix GE-DS Series User Manual

SMTP Setting

The SMTP alarm allows user to set E-Mail account and receiver account, system will send error message via E-Mail if there is
event happened.
The page includes the following fields:
Object
SMTP E-Mail Alarm
SMTP Server IP Address
SMTP Port
SMTP Authentication
User (Mail Account)
Password:
Sender email address
Mail to
Figure 4-2-19 : SMTP interface
Description
Allows user to enable or disable SMTP alarm function.
For inputting SMTP server IP address
For inputting SMTP port number, the default value is 25.
Allows user to enable SMTP authentication. Because of almost SMTP server
deny relay mail to different domain, so user has to set a valid account for relaying
mail. If the mail just sends to the same domain, it may no need SMTP
authentication. Please consult to your network administrator first.
For inputting mail account name, not mail address.
For inputting mail account password.
For inputting the e-mail address from administrator.
Allows user to input mail address which who will be noticed alarm.
GE-DS-82 and NS2503-8P/2C Series User Manual
52