Mac Limit; Port Mirroring Configuration - Interlogix GE-DS Series User Manual

Table of Contents

Advertisement

keywordrunning-config. If you want to save the configuration flash image instead, use the keyword flash.
Syntax:
copy <running-config | flash> tftp <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.

MAC limit

MAC limit allows users to set a maximum number of MAC addresses to be stored in the MAC address table. The MAC
addresses chosen to be stored in MAC address table is the result of first-come-first-save policy. Once a MAC address is stored
in the MAC address table, it stays in until it is aged out. When an "opening" is available, the switch stored the first new MAC
address it sees in that opening. All packets from MAC addresses not in the MAC address table should be blocked.
User can configure the MAC limit setting and fill in the new value.
mac-limit
Description:
Enable MAC limit.
no mac-limit
Description:
Disable MAC limit.
Mac-limit
Description:
Set port MAC limit value, 0 to turn off MAC limit of port.
Syntax:
Mac-limit <port-list> <1-64>
show mac-limit
Description:
Show MAC limit information, including MAC limit enable/disable, per-port MAC limit setting.

Port Mirroring Configuration

Port monitoring is a feature to redirect the traffic occurred on every port to a designated monitoring port on the switch. With this
feature, the network administrator can monitor and analyze the traffic on the entire LAN segment. In the Managed Switch, you
can specify one port to be the monitored ports and any single port to be the monitoring port. You also can specify the direction of
the traffic that you want to monitor. After properly configured, packets with the specified direction from the monitored ports are
forwarded to the monitoring port.
The default Port Monitoring setting is disabled.
mirror-port
Description:
Set port monitoring information. (RX only|TX only|both RX and TX)
Syntax:
mirror-port <rx | tx | both> <port-id> <port-list>
Parameters:
rx specifies monitoring rx only.
GE-DS-82 and NS2503-8P/2C Series User Manual
159

Advertisement

Table of Contents
loading

Table of Contents