Igmp - Interlogix GE-DS Series User Manual

no snmp trap
Description:
Remove trap receiver IP address and port number.
Syntax:
no snmp trap <ip-addr> [<1..65535>]
Parameters:
<ip-addr> specifies the IP address.
<1..65535> specifies the trap receiver port number.
e.g. no snmp trap 192.168.200.1
show snmp trap
Description:
Show all trap receivers.

IGMP

The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite.
igmp
Description:
Enable/disable IGMP snooping.
Syntax:
[no] igmp
igmp fastleave
Description:
Enable/disable IGMP snooping fast leave. If enable, switch will fast delete member who send leave report,
else wait one sec.
Syntax:
[no] igmp fastleave
igmp querier
Description:
Enable/disable IGMP snooping querier.
Syntax:
[no] igmp querier
igmp CrossVLAN
Description:
Enable/disable IGMP snooping CrossVLAN
Syntax:
[no] igmp CrossVLAN
igmp debug
Description:
Enable/disable IGMP snooping debugging output.
Syntax:
[no] igmp debug
show igmp
Description:
Show IGMP snooping information.
Syntax:
GE-DS-82 and NS2503-8P/2C Series User Manual
169