Table of Contents
Advertisement
Chapter 4
Web configuration
This section introduces the configuration and functions of the web-based management
interface for the PoE web smart switch.
About Web-based management
Web-based management of the PoE web smart switch supports Internet Explorer 8.0 or
later, and can be performed from any location on the network. It is based on Java
Applets with an aim to reduce network bandwidth consumption, enhance access speed,
and present an easy viewing screen.
Note:
By default, IE 8.0 and above does not allow Java Applets to open sockets. The
user has to explicitly modify the browser setting to enable Java Applets to use network
ports.
The PoE web smart switch can be configured through an Ethernet connection when the
manager computer is set to the same IP subnet address as the managed switch.
For example, if the default IP address of the PoE web smart switch is 192.168.0.100,
then the administrator computer should be set at 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If the default IP address of the PoE web smart switch has been changed to 192.168.1.1
with subnet mask 255.255.255.0 via the console, then the administrator computer
should be set at 192.168.1.x (where x is a number between 2 and 254) to do the
relative configuration on a manager computer.
ES2402-24P-2C / ES2402-16P-2C / ES2402-8P-2C User Manual
29
Advertisement
Table of Contents
