Port Configuration; Port Control - Interlogix GE-DS Series User Manual

Port Configuration

Use the Port Configuration Menu to display or configure the Managed Switch's ports. This section has the following items:


Port Control


Port Status

Port Statistics

Port Sniffer
Port Control
In Port control you can configure the settings of each port to control the connection parameters, and the status of each port is
listed beneath.
The page includes the following fields:
Object
Port
Description
State
Negotiation
Speed
GE-DS-82 and NS2503-8P/2C Series User Manual
Configures port connection settings
Display the current Port link status and speed etc.
Lists Ethernet and RMON port statistics
Sets the source and target ports for mirroring
Figure 4-3-1: Port Control interface
Description
Use the scroll bar and click on the port number to choose the port to be
configured.
Allows user to input port description for labeling the port.
Current port state. The port can be set to disable or enable mode. If the port state
is set as 'Disable', it will not receive or transmit any packet.
Auto and Force. Being set as Auto, the speed and duplex mode are negotiated
automatically. When you set it as Force, you have to set the speed and duplex
mode manually.
It is available for selecting when the Negotiation column is set as Force. When
the Negotiation column is set as Auto, this column is read-only.
55