Omron R7M-A Series User Manual page 153

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of R7D-AP01H - DRIVER SERVO 200V 100W
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
System Design and Installation
Encoder Cables
Specifications
Cable for Servomotors with
or without brakes (both Cylin-
der-style and Flat-style)
Robot Cable for Servomotors
with or without brakes (both
Cylinder-style and Flat-style)
5. Computer Monitor Cable
A Computer Monitor Cable and the Computer Monitor Software for Servo Drivers (run on Windows)
are required to make Servo Driver parameter settings and perform monitoring from a personal com-
puter.
Name/specifications
Computer Monitor For DOS personal
Cable computers
NEC PC98 note-
book computer
6. Analog Monitor Cable
This is the cable for connecting to the Servo Driver's analog monitor connector (CN4). It is required
for connecting analog monitor outputs to an external device (such as a measuring instrument).
Name/specifications
Analog Monitor Cable
3-12
Cable model number
R7A-CRA@@@C
R7A-CRA@@@CR
2 m R7A-CCA002P2
2 m R7A-CCA002P3
Model
1 m R88A-CMW001S
Insert the cable length in the @@@@ of the
model number. There are five cable lengths: 3
m, 5 m, 10 m, 15 m, and 20 m. (Model number
example: R7A-CRA003C for a 3-m cable)
Insert the cable length in the @@@@ of the
model number. There are four cable lengths: 3
m, 5 m, 15 m, and 20 m. (Model number exam-
ple: R7A-CRA003CR for a 3-m cable)
Use a Robot Cable if cable flexibility is required.
Model
Only 2-meter cables are available.
Only 2-meter cables are available.
Only 1-meter cables are available.
Chapter 3
Remarks
Remarks
Remarks