Table of Contents
Advertisement
As it can be seen above, the handset PIN code is required to reset the handset to its default settings.
After such a reset the handset is still registered. The base is not reset to default when selecting this
feature.
Status
The menu "Status" delivers some useful information to the end user about both base station that the
handset is currently using and handset status.
The displayed information is as follows.
Base station:
-
Software version (the current software version of the base station)
-
Hardware version (the hardware version of the base station)
-
IP address (the IP address of the base station)
-
MAC address (the MAC address of the base station)
-
System name (the name of the system of base stations that the handset is registered to)
Handset status:
-
Software version (the current software version of the handset)
-
Hardware version (the hardware version of the handset)
-
DECT band (the DECT band that the handset is using, e.g. EU or US)
-
Battery level (the current battery level of the handset)
-
IPEI (the IPEI/IPUI number of the handset is a static number identifying the specific handset)
6.5.8 Auto Answer
In this menu it is possible to change the settings for auto answer on the handset.
Version 1.4
Page | 44
Advertisement
Table of Contents
