Unattended Transfer - Mitel IP8630M Operation Manual

2. Press the right softkey "Transfer" on either of the handsets in call, and the counterpart of the
call is put on hold.
3. Enter the number that the transfer should be made to, and press the green "Off-hook" button
4. A ring back tone is heard and a third party is called.
5. As the third party answers the call the handset user initiating the transfer will show a
connected screen as seen above.
- NOTE: The original calling parties and the third party to whom the transfer has been
made are displayed at the top of the active screen. Here, it is seen that it is the
handset with number 2631 that is trying to make an attended transfer to the third
party with number 2558.
6. To make the transfer after the third party has answered the call, press the right softkey
"Transfer", and the call is transferred so that the second and third party are now in call, and a
"Call ended" screen is displayed on the handset that initiated the transfer as seen above.
NOTE: It is also possible to make an attended transfer by pressing either the left softkey "Hold", or the
middle softkey "Conf." instead of pressing the right softkey "Transfer" in step 2.

7.4.2 Unattended Transfer

When making an unattended transfer, the call will be transferred directly to a third party without the
party initiating the transfer needing to call this third party before the transfer.
Version 1.4 Page | 70