Table of Contents
Advertisement
5604 Wireless Handset User Guide
Answer a Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, give you notice of
a call. Ring signal and vibrator can be disabled. The calling party's handset number or name
is shown. The name will be shown if the calling party's handset number is stored in the local
phonebook. Press the Off-hook key to answer the call. When a headset is connected to the
handset, the answering button on the headset can be used to answer the call.
Other answering methods can also be set in the Settings menu, see Settings on page 43. The
answering methods are; Automatically and Loudspeaking.
When "Automatically" is enabled, all incoming calls will be connected automatically.
Answer a Call
When the signal sounds press
call in loudspeaking mode. The name/number of the calling party is displayed if calling line
information is available.
End a Call
Press
to end the call. The duration of the call is shown in the display. The total time of
the call can also be retrieved from the Calls menu > Call time.
18
to answer the call, or press the soft key
to answer the
Advertisement
Table of Contents
