Silencing An Incoming Call; Ending A Call; Initiating A Call; Initiating A Call From Idle - Mitel IP8630M Operation Manual

NOTE: An incoming call can also be rejected by pressing the red "On-hook" key.

7.1.3 Silencing an Incoming Call

When the handset is alerting it is possible to press the left softkey "Silent" whereas the handset will
continue to alert, but without any heard ringing.

7.1.4 Ending a Call

To end an ongoing call press the red "On-hook" key
of the call is shown in the display. Furthermore this duration time can also be viewed from the call list
where the call is stored.
NOTE: If one call is active and another call is on hold, then the active call will be terminated when
pressing the red "On-hook" button, and the handset automatically returns to the call on hold; i.e. the
call on hold is now active, and the user has to press the red "On-hook" button again to terminate this
call.

7.2 Initiating a Call

A call can be initiated from different locations on the handset:
- By entering the number directly from idle
- From the "Contacts" menu
- From the "Calls" menu
- From the "Central Directory"
How to initiate a call from these different directories is explained in the following sub sections.

7.2.1 Initiating a Call from Idle

When initiating a call it must be done according to the following:
1. Enter the number of the person you want to call when the handset is in idle.
2. Press the green "Off-hook" button
Version 1.4
, and the call will be terminated. The duration
to call the number.
Page | 67