Deregister; Select Network - Mitel IP8630M Operation Manual

NOTE: For the handset to function on different base systems, the handset must be completely out of
range of system 1 to connect to system 2.

6.4.2 Deregister

The handset can be deregistered from a registration. The user will in this case be prompted for a PIN
code (base deregistration PIN), the PIN code is default "0000" and cannot be changed via the handset.
This is displayed below.
When the registration that should be deregistered is selected, a warning message "Delete
registration?" will be displayed as seen above. The user then have to accept by pressing the left
softkey "Yes", or the right softkey "No" to cancel the operation.

6.4.3 Select Network

If the handset is registered to different base systems (networks) the preferred network can be chosen
in this menu by highlighting it and pressing the left softkey "Select" as shown below.
Version 1.4 Page | 30