Initiating A Call From Contacts; Initiating A Call From Calls; Initiating A Call From The Central Directory - Mitel IP8630M Operation Manual

Table of Contents

Advertisement

3. The handset will show a "Calling" screen as seen above.
4. When the counterpart answers the call the screen will show "Connected", and the two parts
are now in call.
7.2.1.1 Line Call
If the handset is used in a multiline environment, it is possible to make a call from different lines by
pressing the middle softkey "Line", and choose the line according to which system the call should be
made from. See 7.5.6 Handset Name, Line, Reset Settings, Status.
NOTE: Multiline environments are not supported by the ShoreTel Multi-Cell DECT System.

7.2.2 Initiating a Call from Contacts

To initiate a call from the contact list, there has to be contacts added to the local phonebook. When
this prerequisite is met a local contact can be called by highlighting the contact in the contact list, and
then pressing the left softkey "Call", or pressing the green "Off-hook" button.
NOTE: The list of local contacts can be reached from the menu "Contacts" or directly from idle by
pressing the left softkey when in idle.

7.2.3 Initiating a Call from Calls

The number of an outgoing, incoming or missed call can be called directly from the call list by
highlighting the number and pressing the left softkey "Call" or the green "Off-hook" button to call the
entry.
NOTE: The "Calls" list can be reached from the menu "Calls" or directly from idle by pressing either the
green "Off-hook" button or the right softkey when in idle.

7.2.4 Initiating a Call from the Central Directory

When opening the "Central directory" a call can be made to a specific contact by searching for this
contact, and thereby enter the list from which a contact can be called by pressing the green "Off-hook"
key.
If different numbers are assigned to one contact a green arrow is showed to the right of the contact,
and the right/left navigation keys can be used to choose which number that should be called.
NOTE: The "Central Directory" can be reached both from the menu "Central Directory" or directly from
the idle by pressing the middle softkey when in idle.
Version 1.4
Page | 68

Advertisement

Table of Contents
loading

Table of Contents