Table of Contents
Advertisement
When the mute function is enabled during a call it is indicated on the "Connected" screen with the
image of the handset that is red as seen above. Mute is turned off by pressing the mute button again.
Furthermore, a press on the mute button when the handset is in idle will activate the "Push To Talk"
function; for further information on this feature see section 6.5.15 Push To Talk.
4.4 The Keypad
The keypad is used when entering a name or number, and the sketch below shows the available
characters on the handset.
NOTE: Depended on the selected menu language, other characters can be available. Therefore the
character order can differ from the table above.
4.4.1 Idle Mode, and Number Input Mode
When in idle a short press on a key enters the digits "0" – "9" and the characters * and #.
In number input mode, a long press on "0" generates a +.
4.4.2 In Text Input Mode
While in text input mode a short press on a key 0-9 displays the first available character on that
specific key. The marked character is then selected after a timeout, or when another key is pressed.
By pressing the *-key it is possible to change the text to be upper/lower case or only numeric (Abc,
abc, ABC, or 123).
Version 1.4
Page | 15
Advertisement
Table of Contents
