Table of Contents
Advertisement
In the "Audio settings" menu only "Ring emergency", "Vibrator" and "Noise reduction" can be entered
when the "Silent" profile is enabled.
NOTE: With the "Silent" profile enabled, a ring melody will still be played when the handset receives
an emergency alarm message.
NOTE: Alarms are not supported in the ShoreTel Multi-Cell DECT System.
6.5.1.2 Ring Volume and Ring Melody
When the handset receives an incoming call, message, or alarm different ring volumes and melodies
can be selected.
Ring volume
The ring volume for calls can be adjusted from mute to volume 6. The currently applied level is
displayed when entering the menu "Ring volume".
To select the desired ring volume the navigation keys up/down or right/left is used to respectively
increase or decrease the volume. Thereby, pressing "Ok" saves the current ring volume. The currently
applied ring melody is played when adjusting the ring volume so that the respective ring volume can
be heard before selected.
Ringer mute
The ringer is switched off when the lowest level is selected in "Ring volume", and a mute image is
showed in the display as seen below.
When the ring volume is set to mute, the "Sound off" icon is displayed in the status bar, and no sound
is heard when receiving an incoming call or message.
Version 1.4
Page | 33
Advertisement
Table of Contents
