Table of Contents
Advertisement
5 Basic Operation
The following explain three basic operations of the handset: how to switch the handset on/off, how to
lock/unlock the keypad, and the available options when entering a number in idle.
5.1 How to Switch the Handset On/Off
Switching on the handset
To switch the handset on long press the on-hook key
to switch the handset on. When the
handset is on, it will display "Searching" for a short while until a signal is detected, and then the
handset is showing the registration number and is ready for use.
Switching off the handset
To switch the handset off return to the idle screen and long press the on-hook button
, and the
handset will turn off.
5.2 Lock/Unlock the Keypad
To prevent accidentally pressing keys and making a call the keypad can be locked.
Locking the keypad
To lock the keypad long press the
in idle, and a text message is displayed "Press and hold *".
When the keypad is locked, the "Key Lock" icon
is displayed in the status bar.
Unlocking the keypad
To unlock the keypad long press
until the text message "Press and hold *" disappears.
NOTE: It is possible to answer/reject an incoming call while the keypad is locked.
5.3 Entering a number in idle
When entering a number in idle it is possible to call the number by pressing the off-hook key
Otherwise, the following three different options are available when a number is entered in idle.
Save
With this option the number can be added as a local contact by pressing the left softkey "Save".
Line
Using this option, by pressing the middle softkey "Line", you can choose which line the call should be
initiated from if the handset is set up to using different lines (see the base station manual for
additional information on this; reference [2])
Clear
Using the right softkey "Clear" deletes one character at a time to the left of the cursor.
Version 1.4
Page | 17
Advertisement
Table of Contents
