Table of Contents
Advertisement
Always on
With the "Always on" enabled, the caller ID will be hidden for the counterpart for all outgoing calls
initiated until this feature is disabled again.
NOTE: When hide number enabled, base sends SIP header "Privacy: id" to address
sip:anonymous@anonymous.invalid
The PBX must support anonymous calls otherwise the call will be rejected, and the handset cannot
make an outgoing call if this feature is enabled.
6.5.12 Call Forward
The "Call Forward" feature enables the user to forward all incoming calls in different cases as
described below.
Forward Unconditionally
If this feature is enabled all incoming calls to the handset will be forwarded to the number setup in
"Forward To" as seen below.
In this case the handset will not receive any incoming calls, but all calls will automatically be forwarded
to the number setup in "Forward To".
Forward No Answer
This feature controls if incoming calls to the handset should be forwarded if the call is not answered.
Version 1.4
Page | 47
Advertisement
Table of Contents
