Table of Contents
Advertisement
As displayed above, pressing 'New' makes it possible to write a new message using the keypad. The
maximal message text length is 160 characters, and the number of characters typed are displayed at
the bottom right corner of the text field.
To choose other symbols than those available on the keypad press the middle softkey 'Symbol', and an
amount of symbols will be available to select. If in need of deleting what has just been written the
right softkey 'Clear' can be pressed, and the previous character is hereby deleted.
NOTE: Use the
-key to switch between the input modes 'Abc', 'ABC', '123', and 'abc'.
6.6.3 How to Send a New Message
When a new message has been written, press the left softkey "Send" to send it.
By pressing 'Send' two options are presented. The message can either be sent as 'Normal', or as
'Urgent'.
Normal
If a message is sent as 'Normal' the message is displayed as normal in the counterpart's inbox.
Urgent
When a message is sent as 'Urgent' the message is displayed with an exclamation mark in the
counterpart's inbox, and with an exclamation mark in the 'Sent messages'. Urgent messages are
always displayed at the top of the inbox.
Choosing either of these two options, four different possibilities are given as to who the message can
be sent to as seen above.
Contacts
By selecting this option the contact list is displayed, and the message can be sent to one of the local
contacts in the contact list.
Enter number
In this option it is possible to enter a number, and thereby sending a message to this number.
Send to many
By choosing 'Send to many' the message can be sent to more than one contact in the contact list
without exiting from the list of contacts. This is displayed below.
Version 1.4
Page | 54
Advertisement
Table of Contents
