Auto - Answer - Mitel OpenPhone 27 User Manual

O P 27 H
PEN HONE ANDSET
A -
UTO ANSWER
This feature can only be used when a headset is attached to the OP27 handset.
To enable or disable auto-answer:
This is not the internal OP27 headset auto-answer feature.
1. Long press the
2. Press No until Auto Answer? appears.
3. To enable Auto-Answer, press TurnOn.
4. To disable Auto-Answer, press TurnOff.
To answer a call when you hear ringback:
•
Communicate by using the speaker and the microphone.
To terminate a call:
•
Press OR
then release the switch.
To enable or disable headset auto-answer:
•
Choose the Auto-Answer feature from the local mode internal menu.
Page 24
U G
SER UIDE
key.
. If the headset has an on/off-hook switch wired into the headset cord,