Mitel IP8630M Operation Manual page 35

6.5.1.4 Ring emergency
With the "Ring emergency" menu it can be chosen which melody should be played when the handset
receives an alarm message. The ring melody is chosen in the same way as the ring melody for incoming
calls. For additional information on the handset alarm feature reference is made to chapter 6.9 Alarms
List.
NOTE: Alarms are not supported in the ShoreTel Multi-Cell DECT System.
6.5.1.5 Alert Volume and Alert Tone
NOTE: Alarms are not supported in the ShoreTel Multi-Cell DECT System.
When an alarm clock occurs on the handset, different ring volumes and melodies can be selected.
Alert volume
The alert volume can be adjusted from mute to volume 6. The currently used level is displayed when
entering the menu "Alert volume".
To select the desired alert volume the navigation keys up/down or right/left is used to respectively
increase or decrease the volume. Thereby, pressing "Ok" saves the current alert volume. The currently
applied alert melody is played when adjusting the alert volume so that the respective alert volume can
be heard before selected.
Alert Volume Mute
The alert sound is switched off when the lowest level is selected in "Alert volume", and a mute image
is showed in the display. When the alert is mute, no audio is heard when an alarm occurs.
Version 1.4 Page | 35