Call Waiting - Mitel IP8630M Operation Manual

5. As the second party answers the call a blue "Connected" screen as above is displayed.
6. By pressing the left softkey "Swap" the green "Connected" screen is displayed instead which
indicates that the ongoing call is now between the first party whereas the second party is now
put on hold.
7. From this point, it is possible to toggle between the two parties by pressing "Swap". For each
time that "Swap" is pressed a toggle is made between the two external parties, and the
"Connected" screen shows either blue or green signal lines to indicate if it is the first or second
call that is ongoing.

7.6 Call Waiting

When two parties are in call it is possible to receive a call waiting on one of the handsets which means
that a third party calls one of the two parties already in call. During a call waiting two short beeps are
heard every three seconds in the handset receiving the call waiting, and the following screen is
displayed:
In this case it is seen that the ongoing call is with party 2558 whereas the call waiting is from party
2549 (that is called Patricia in the local phonebook).
It is possible to reject the call waiting with the right softkey "Reject", and hereby continuing the
ongoing call with party 2558.
If the call party wants to answer the call waiting the green off-hook key should be pressed, and the
following screen is displayed:
Version 1.4 Page | 72