Nailing Brackets - FireplaceXtrordinair ProBuilder 36 CleanFace MV Installation Manual

Nailing Brackets

The fireplace has nailing brackets on both sides. Secure the fireplace to the framing with the nailing brackets.
NOTE: Make sure the fireplace is square and plumb when placed in the framing. Measured corner-to-corner the
fireplace should be square. Use shims to insure the fireplace is square.
NOTE: The nailing brackets have two positions: standard and extended. See the section "Facing Requirements"
for details on which position is best for your installation.
NOTE: 2 holes are provided on
each side of the fireplace if you
wish to secure the base of the
fireplace to the floor (platform).
Standard Position
(nailing brackets as shown below)
© Travis Industries
Installation
(for qualified installers only)
a
b
c
Rotate the two nailing
brackets out (each side)
Bend the two nailing
brackets out (each side)
Secure the fireplace to
the framing using the
nailing brackets
Extended Position
(rotate nailing brackets as shown below)
9/25/18 - 1488
11
PB36 CF Install