Mechanical Locks; System Color; Rack And Cabinet Mouting Option; Server Board Connector And Component Layout - Intel SC5650HCBRP Product Specification

Intel® Server System SC5650HCBRP TPS
2.1.2

Mechanical Locks

®
The Intel Server System SC5650HCBRP chassis support the installation of a padlock loop (see letter "A" in the
following figure) at the rear of the chassis. Additionally, the system ships with a two-position mechanical lock (see
letter "B") on the front bezel assembly to prevent access to the hard drives and the interior of the system.
2.1.3

System Color

®
The Intel Server System SC5650HCBRP chassis is offered in one color - Black (GE701).
2.1.4

Rack and Cabinet Mouting Option

®
The Intel Server System SC5650HCBRP supports a rack mount configuration. The rack mount
kit includes the chassis slide rails, rack handle, rack orientation label, screws, and manual. This
rack mount kit is designed to meet the EIA-310-D enclosure specification. General rack
compatibility is further described in the Server Rack Cabinet Compatibility Guide found at
http://support.intel.com.
2.1.5

Server Board Connector and Component Layout

The following figure shows the layout of the server board. Each connector and major component
is identified by a number or letter, and a description is given below the figure.
Revision 1.2

Figure 6. Mechanical Locks

Intel order number E81443-002
Overview
9