Intel® Server System SC5650HCBRP TPS
7.3.2.2.3
Mass Storage Controller Screen
The Mass Storage screen allows the user to configure the SATA/SAS controller when it is
present on the baseboard module card of an Intel system.
To access this screen from the Main menu, select Advanced > Mass Storage.
Mass Storage Controller Configuration
Intel® SAS Entry RAID Module
Configure Intel® SAS Entry RAID Module
Onboard SATA Controller
Configure SATA Mode
► SATA Port 0
► SATA Port 1
► SATA Port 2
► SATA Port 3
► SATA Port 4
► SATA Port 5
Figure 39. Setup Utility — Mass Storage Controller Configuration Screen Display
Table 74. Setup Utility — Mass Storage Controller Configuration Screen Fields
Setup Item
Intel® Entry SAS RAID
Module
Configure Intel® Entry
SAS RAID Module
Onboard SATA
Controller
Revision 1.2
Advanced
Options
Enabled
Enabled or Disable the Intel® SAS Entry RAID
Disabled
Module
IT/IR RAID
IT/IR RAID – Supports Entry-Level HW RAID 0,
RAID 1, and RAID 1e, as well as native SAS pass
Intel® ESRTII
through mode; Intel® ESRTII - Intel® Embedded
Server RAID Technology II, which supports RAID
0, RAID 1, RAID 10 and RAID 5 mode. RAID 5
support requires optional Software RAID 5
Activation Key
Enabled
Onboard Serial ATA (SATA) controller.
Disabled
Intel order number E81443-002
Enabled / Disabled
IT/IR RAID / Intel
ESRTII
®
Enabled / Disabled
ENHANCED / COMPATIBILITY / AHCI / SW RAID
Not Installed/<Drive Info.>
Not Installed/<Drive Info.>
Not Installed/<Drive Info.>
Not Installed/<Drive Info.>
Not Installed/<Drive Info.>
Not Installed/<Drive Info.>
Help Text
BIOS Setup Utility
Comments
Unavailable if the SAS Module
(AXX4SASMOD) is not present.
Unavailable if the SAS Module
(AXX4SASMOD) is disabled or not
present.
125