Hdd Expander Sas Hot Swap Backplane; 6-Hdd Expander Sas Hot Swap Backplane Overview - Intel SC5650HCBRP Product Specification

6-HDD Expander SAS Hot Swap Backplane

5. 6-HDD Expander SAS Hot Swap Backplane
5.1

6-HDD Expander SAS Hot Swap Backplane Overview

®
The Intel Server System SC5650HCBRP integrates one 6-HDD Expander SAS Hot-swap
Backplane (HSBP). The architecture is based on the Vitesse VSC7161* SAS Expander with
enclosure management controller and has support for up to six SAS or SATA drives.
The 6HDD Expander SAS HSBP supports the following feature set:
1.5 Gbps and 3.0 Gbps self-configuring Serial Attached SCSI (SAS) Expander with
embedded v3000 processor (Vitesse* Stanford-I 32-bit RISC CPU) for local control and
Expander or enclosure management functions
Non-volatile SPI Flash
2
I C_based EEPROM
Temperature Sensor
2
Two I C interfaces
SAS, SATA, and SATA II extension-compatible
Compliance with SCSI Enclosure Service (SES) specification
Compliance with Intelligent Platform Management Interface (IPMI) 1.5
Support for up to six SAS 3.0 GHz/1.5 GHz, SATA II or SATA I Drives
Hot-swap Drive support
Two 4-pin Standard HD Power Connectors
The following figure shows the functional blocks of the Expander 6-HDD SAS HSBP.
92
Intel order number E81443-002
Intel® Server System SC5650HCBRP TPS
Revision 1.2