11. Design And Environmental Specifications; Intel ® Server System Sc5650Hcbrp Design Specifications; 11.2 Mtbf; Table 119. Server Board Design Specifications - Intel SC5650HCBRP Product Specification

Intel® Server System SC5650HCBRP TPS

11. Design and Environmental Specifications

11.1 Intel Server System SC5650HCBRP Design Specifications
®
Operation of the Intel
following table may cause permanent damage to the system. Exposure to absolute maximum
rating conditions for extended periods may affect system reliability.
Operating Temperature
Non-Operating Temperature
DC Voltage
Shock (Unpackaged)
Shock (Packaged)
< 20 pounds
20 to < 40 pounds
40 to < 80 pounds
80 to < 100 pounds
100 to < 120 pounds
120 pounds
Vibration (Unpackaged)
Disclaimer Note: Intel Corporation server boards contain a number of high-density VLSI and
power delivery components that need adequate airflow to cool. Intel ensures through its own
chassis development and testing that when Intel
fully integrated system will meet the intended thermal requirements of these components. It is
the responsibility of the system integrator who chooses not to use Intel
building blocks to consult vendor datasheets and operating parameters to determine the amount
of airflow required for their specific application and environmental conditions. Intel Corporation
cannot be held responsible, if components fail or the server board does not operate correctly
when used outside any of its published operating or non-operating limits.

11.2 MTBF

The following is the calculated Mean Time Between Failures (MTBF) 30° C (ambient air). These
values are derived using a historical failure rate and multiplied by factors for application,
electrical and/or thermal stress and for device maturity. You should view MTBF estimates as
"reference numbers" only.
•
Calculation Model: Telcordia Issue 1, method I case 3
•
Operating Temperature: Server in 35° C ambient air
•
Operating Environment: Ground Benign, Controlled
Revision 1.2
®
Server System SC5650HCBRP at conditions beyond those shown in the

Table 119. Server Board Design Specifications

Intel order number E81443-002
Design and Environmental Specifications
0º C to 55º C 1 (32º F to 131º F)
-40º C to 70º C (-40º F to 158º F)
± 5% of all nominal voltages
Trapezoidal, 50 G, 170 inches / sec
36 inches
30 inches
24 inches
18 inches
12 inches
9 inches
5 Hz to 500 Hz 3.13 g RMS random
®
server building blocks are used together, the
®
developed server
173