Platform Management; Feature Support; Ipmi 2.0 Features; Non-Ipmi Features - Intel SC5650HCBRP Product Specification

Intel® Server System SC5650HCBRP TPS
6.

Platform Management

The platform management subsystem is based on the Integrated BMC features of the
ServerEngines* Pilot II. The onboard platform management subsystem consists of
communication buses, sensors, and the system BIOS, and server management firmware.
Figure 33 provides an illustration of the Server Management Bus (SMBUS) architecture as used
on these server boards.
6.1

Feature Support

6.1.1

IPMI 2.0 Features

Baseboard Management Controller (BMC)
IPMI Watchdog timer.
Messaging support, including command bridging and user/session support.
Chassis device functionality, including power/reset control and BIOS boot flags support.
Event receiver device: The BMC receives and processes events from other platform
subsystems.
Field replaceable unit (FRU) inventory device functionality: The BMC supports access to
system FRU devices using IPMI FRU commands.
System event log (SEL) device functionality: The BMC supports and provides access to
a SEL.
Sensor data record (SDR) repository device functionality: The BMC supports storage
and access of system SDRs.
Sensor device and sensor scanning/monitoring: The BMC provides IPMI management of
sensors. It polls sensors to monitor and report system health.
IPMI interfaces:
Host interfaces include system management software (SMS) with receive message
-
queue support and server management mode (SMM).
IPMB interface.
-
LAN interface that supports the IPMI-over-LAN protocol (RMCP, RMCP+).
-
Serial-over-LAN (SOL)
ACPI state synchronization: The BMC tracks ACPI state changes provided by the BIOS.
BMC Self-test: The BMC performs initialization and run-time self-tests, and makes
results available to external entities.
See also the Intelligent Platform Management Interface Specification Second Generation v2.0.
6.1.2

Non-IPMI Features

The BMC supports the following non-IPMI features. This list does not preclude support for future
enhancements or additions.
In-circuit BMC firmware update
Fault resilient booting (FRB): FRB2 is supported by the watchdog timer functionality.
Revision 1.2
Intel order number E81443-002
Platform Management
101