Figure 42. Setup Utility - Pci Configuration Screen Display; Table 77. Setup Utility - Pci Configuration Screen Fields - Intel SC5650HCBRP Product Specification

BIOS Setup Utility
7.3.2.2.6 PCI Screen
The PCI Screen allows the user to configure the PCI add-in cards, onboard NIC controllers, and
video options.
To access this screen from the Main screen, select Advanced > PCI.
Advanced
PCI Configuration
Maximize Memory below 4GB
Memory Mapped I/O above 4GB
Onboard Video
Dual Monitor Video
Onboard NIC1 ROM
Onboard NIC2 ROM
Onboard NIC iSCSI ROM
NIC 1 MAC Address
NIC 2 MAC Address
Figure 42. Setup Utility — PCI Configuration Screen Display
Setup Item
Maximize Memory
below 4GB
Memory Mapped I/O
above 4GB
Onboard Video
Dual Monitor Video
Onboard NIC1 ROM
130
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
<MAC #>
<MAC #>
Table 77. Setup Utility — PCI Configuration Screen Fields
Options
BIOS maximizes memory usage below 4GB for an OS
Enabled
without PAE support, depending on the system
Disabled
configuration. Only enable for an OS without PAE
support
Enable or disable memory mapped I/O of 64-bit PCI
Enabled
devices to 4 GB or greater address space.
Disabled
Enabled Onboard video controller.
Disabled Warning: System video is completely disabled if this
option is disabled and an add-in video adapter is not
installed.
Enabled If enabled. both the onboard video controller and an
add-in video adapter are enabled for system video.
Disabled
The onboard video controller becomes the primary
video device.
Enabled If enabled. loads the embedded option ROM for the
onboard network controllers.
Disabled
Warning: If [Disabled] is selected, NIC1 cannot be
used to boot or wake the system.
Intel order number E81443-002
Intel® Server System SC5650HCBRP TPS
Help Text Comments
When disabled, the system
requires an add-in video
card for the video to be
seen.
Revision 1.2