T: Motor Autotuning - Omron SYSDRIVE RV Series User Manual

Copy Function: o3
User parameters for the copy function are shown in the following table.
Name
Param-
eter
Number Display
Copy func- 0: Normal operation
tion selec- 1: READ (Inverter to
tion Operator)
o3-01
2: COPY (Operator to
Copy Func
Inverter)
Select
3: Verify (compare)
Read per-
mitted
0: Read prohibited
selection
o3-02
1: Read permitted
Copy
Allowable

T: Motor Autotuning

The following settings are made with the motor autotuning parameters (T parameters): Settings for autotuning.
Name
Param-
eter
Number Display
Motor 1/2
Set the location where the
selection
autotuned motor parameters
T1-00 are to be stored.
Select
1: E1 to E2 (motor 1)
2: E3 to E4 (motor 2)
Motor
Autotuning Set the autotuning mode.
mode selec- 0: Rotational autotuning
tion 1: Stationary autotuning 1
T1-01 2: Stationary autotuning for
line-to-line resistance
Tuning
only
Mode Sel
4: Stationary autotuning 2
Motor out-
put power
Set the output power of the
T1-02
motor in kilowatts.
Mtr Rated
Power
Motor rated
voltage
Set the rated voltage of the
T1-03
motor in volts.
Rated Volt-
age
Motor rated
current
Set the rated current of the
T1-04
motor in amps.
Rated Cur-
rent
Motor base
frequency
Set the base frequency of the
T1-05
motor in hertz.
Rated Fre-
quency
Setting
Description
Range
0 to 3
0 or 1
Setting
Description
Range
1 or 2
0 to 2,
*1
4
0.00 to
650.00
0.0 to
*2
255.0
0.32 to
*3
6.40
0.0 to
*5
300.0
Control Methods
Change
Factory during
V/f Open
Setting Opera-
V/f with Loop
tion
PG Vector
0 No A A
0 No A A
Control Methods
Change
Factory during
V/f Open
Setting Opera-
V/f with Loop
tion
PG Vector
1 No Yes Yes Yes
2
No Yes Yes Yes
*7
0.40
No Yes Yes Yes
kW
*4
200.0 V
No No No Yes
*2
1.90 A
No Yes Yes Yes
*4
60.0
No No No Yes
Hz
User Parameter Tables
Regis-
Flux
Page
ter
Vec-
tor
A A 515H 6-185
A A 516H 6-185
Regis-
Flux
Page
ter
Vec-
tor
Yes 700H 4-15
701H 4-12
Yes
4-15
Yes 702H 4-15
Yes 703H 4-15
Yes 704H 4-15
Yes 705H 4-15
5-
75