Omron SYSDRIVE RV Series User Manual page 438

Func-
Display
tion
ID UNMATCH
INV. KVA
UNMATCH
CONTROL
Copy
UNMATCH
COPY ERROR
SUM CHECK
ERROR
VERIFY
ERROR
Verify
ID UNMATCH
-18
7
Table 7.5 Errors during Copy Function (Continued)
Meaning
The Inverter product code or software
ID not matched
number is different.
The capacity of the Inverter being
Inverter capacity
copied and the capacity in the Digital
matched
Operator are different.
The control method of the Inverter
Control method
being copied and the control method
matched
in the Digital Operator are different.
The parameter written to the Inverter
was compared with the parameter in
Verify error
the Digital Operator and they were
different.
The checksum in the Inverter parame-
ter area was compared with the check-
Checksum error
sum in the Digital Operator parameter
area and they were different.
The Digital Operator and Inverter set-
Verify error
tings do not agree.
The Inverter product code or software
ID not matched
number is different.
Probable causes
Use the copy function for the same
product code and software number.
Use the copy function for the same
Inverter capacity.
Use the copy function for the same
control method.
Retry the copy.
Retry the copy.
Retry the copy and verify again.
Use the copy function for the same
product code and software number.
Corrective Actions