Configuring the device
Software required
Use only the software SIMATIC WinCC Unified V17 or higher to configure the Unified Comfort
hygienic HMI devices.
Compatibility
Use the article number of the corresponding Unified Comfort HMI device for configuring a
Unified Comfort hygienic HMI device.
Hygienic HMI device
MTP700 Unified Comfort Hygienic
MTP700 Unified Comfort Hygienic Neutral
MTP1000 Unified Comfort Hygienic
MTP1000 Unified Comfort Hygienic Neutral
MTP1200 Unified Comfort Hygienic
MTP1200 Unified Comfort Hygienic Neutral
MTP1500 Unified Comfort Hygienic
MTP1500 Unified Comfort Hygienic Neutral
MTP1900 Unified Comfort Hygienic
MTP1900 Unified Comfort Hygienic Neutral
MTP2200 Unified Comfort Hygienic
MTP2200 Unified Comfort Hygienic Neutral
Projects of the corresponding HMI devices are compatible, which means you can use the
configuration of a Unified Comfort HMI device for a Unified Comfort hygienic HMI device.
Note
"Backup", "Restore" and "Automatic Backup"
The "Backup", "Restore" and "Automatic Backup" functions are compatible for HMI devices
with the same article number. This means you can do the following:
• Restore the backup of a Unified Comfort HMI device on a Unified Comfort hygienic HMI
device, and vice versa.
• Use the system memory card of a Unified Comfort HMI device in a Unified Comfort
hygienic HMI device, and vice versa.
36
Article number
6AV2128-3GB40-0AX0
6AV2128-3GB70-0AX0
6AV2128-3KB40-0AX0
6AV2128-3KB70-0AX0
6AV2128-3MB40-0AX0
6AV2128-3MB70-0AX0
6AV2128-3QB40-0AX0
6AV2128-3QB70-0AX0
6AV2128-3UB40-0AX0
6AV2128-3UB70-0AX0
6AV2128-3XB40-0AX0
6AV2128-3XB70-0AX0
Unified Comfort Panels Hygienic
Compact Operating Instructions, 04/2023, A5E52219907-AA
4
Based on HMI device,
article number for
configuration
MTP700 Unified Comfort,
6AV2128-3GB06-0AX1
MTP1000 Unified Comfort,
6AV2128-3KB06-0AX1
MTP1200 Unified Comfort,
6AV2128-3MB06-0AX1
MTP1500 Unified Comfort,
6AV2128-3QB06-0AX1
MTP1900 Unified Comfort,
6AV2128-3UB06-0AX1
MTP2200 Unified Comfort,
6AV2128-3XB06-0AX1